First time on dyno

Its funny im not sure of everything its a
360 +30
TTI headers
Eldenbroch rpm heads 202-160 valve
Eddy rpm air gap intake
comp cam with 508 lift hydralic lifters.
I no the engine I pulled the rods and crank out of were not stock, they had maybe 1000 miles on it so I used it.
mopar ignition with trailbeast hei module
timing is 22 initial 38 total
355 gears with 8 3/4
Im tired and not thinking strait so If you have other question just ask.
I used mopar performance pistons, and was told comprression was 10.2