Building a wrecked SRT8 Challenger

I was in the middle of a kitchen faucet project today when Tony (Challenger Project partner) called. I got to the shop when they were pushing the Chally off the hoist and putting it to bed in the corner until parts come in. We already have a bumper cover, control arms, lower radiator support, radiator, and the ac condenser. (the ac still had a charge in it) The cradle is ordered. The wheels have been sent off to Keystone to be checked, repaired, and re finished. Toplscuda (from here at FABO) has a oil pan and pick-up. We need to get some random parts, 2 airbags, dash pad, module, and seat belt assemblies. We also need a couple tires and a headlight assm for the drivers side. We also need a grill surround. This is getting exciting. If all the parts come in we might have this thing running and driving in a week or so. I'm sure the big pumpkin will be done by Halloween! Tmm

Photo 6 and 7 shows the only damage to the cowl. It is low under the drivers floor but no seam sealer is cracked and no spot welds are cracked. I have the owners name. I need to call him and find out what happened. May be it got stolen?