centerforce clutch problem

How about center springs in the disc? Or are it/ they solid?

I did check them and they were tight, no rattle. I went over so many things trying to blame myself and I just cant find anything wrong. I have a DCM flywheel resurfacer and I only use a diamond stone and I set the machine on auto for .004 and it only took .0025 to clean the surface, the machine is so accurate and puts a finish on a wheel that you could not copy manually so I cant blame the wheel.


I had a noise in my DF clutch after it had less than 200 miles on it. No chatter, but one day backing out of the garage, I noticed a rattling sound as I started to let the pedal out. So I put the car back in the garage and pulled the clutch cover and a ball bearing from one of the pivot "fingers" rolled across the floor. WTF! By now the clutch was out of warranty, time wise, so I thought I might get a hassle on getting a replacement at no charge to me. I took the clutch assembly back to where I bought it and they sent it in to have Centerforce look at it. 2 weeks later I had a new clutch waiting for me to pick up, no charge. So I only say they were fair to me so hopefully you'll get the same customer service.

I am keeping my hopes up that they will stand behind their product and send me a replacement, though usually my luck does not go that way...