rack install failed

its hard to tell from the pictures but the rack runs under the pan right where the center link did before,the worm gear part of the rack is the only thing lower,but not as bad as it looks.the purpose of this contraption was to allow the use of any old manifold,and to keep clear of everything around the starter it uses a quite different approach,by using a small transfer gear box that then redirects the steering shaft from front to rear, its out of a izusu rodeo,and or pathfinder. but they used front steer,so the rack is from a honda,but as it seems its a poor choice as the inner tie rod measurement is several inches wider than the centerlink,and i think getting one with the same spread as the center link may possibly help.