bogging 318

Hi, Sorry for the slow reply, I've been working a little more then expected...

So I am now at an 800 rpm idle with very little vacume at the advance port (not enough to read on the guage), and sitting at 14 degress initial timming.
And when the throtle is brought up to 2000 rpm there is about 18 hg in the vacume advance port and 32 degrees of timming. As for the accelerater pump I lubed the shaft with carb cleaner and reset it to a longer stroke and it looks like its acting correctly.

And now I have two small videos that show guages and settings but I can't seem to load them up? And I have a few pics as well but it seems I will have to take new pics at a lower quality and smaller size to upload.

Also, should the Accelerator pump shoot a stream the whole length of the throtle movement? or just the first bit?

Thank you