Off the Cuff....

I ran a Mopar Performance remanufactured short block with Speed Pro hyper pistons, stock rods and crank. The cam was the 292, .508 Purple Shaft. Box stock Edelbrock heads.
Short block was $1000 and the heads were $1200.
I topped this combo off with a 174 blower (6PSI) and sprayed it with a 75 shot on the street.
Track use would get a 150 shot.
I ran this combo for years, it was my daily driver and had at least 30,000 miles , hard miles.
I would drive 225 miles to Carlisle Pa, 4000RPMs for hours.
Shifting at the track would be around 6000RPMs.
Unless I was losing, than I'd pin the tach at 8000. LOL
Heres what was in the pan after running 10.6@128MPH