1964 1/2 valiant build thread.
then i get back to work on the rear of the car. started the mini tub on the passenger side.
first i scraped off all the factory seam sealer and wire wheeled the surgery site.
then i cut the trunk hinge bracket off the wheel tub. i was careful to cut it as low as possible.
then i cut the cross brace off in the back seat area
then i cut the inner wheel tub out. i made sure to cut the radius nice and close to the wheel tub so that i create a nice lip to make a template from.
then i spent what felt like forever cleaning up the wheel tub inside and out.
that is where i left off on the mini tube. i need to get a template made and cut the inner floor and then put her all back.