Dent Trouble

that is an easy fix if its in the middle of a duster or dart fender..if you get behind it and push it out with your hand then take a dolly hammer and tap down on the top edge of the fender. then if it is off get a wide blunt tipped chisel I have a 3inch wide masons chisel that I have ground rounded and put that in the cres of the fender on the back side and tap it till its strate and that should take the flimsiness out. those fenders are flimsy from the factory so what I do after strating them (and im sure I will here **** about this) Is take a pece of 1/4 or 3/16 round rod and epoxy it to the back side rite in that cress of the fender..........hope this helps it always worked for me........Artie.