1990 la roller 360........cam question

Demon 408 said

Here's what I'm using on my 92 LA 360 roller block (408 stroker)

Roller Lifters, 1992 LA 360 Stock
Rockers, Comp Cams Pro Magnum Roller Rocker Arms, 1.5 ratio
Hold Downs, Mopar P5249712
Camshaft - Hydraulic Roller (Cam Motion) XA242-380-248-375-10
Duration Intake @50 242
Duration Exhaust @50 248
Lift Intake 570
Lift Exhaust 562
Lobe Separation 110
Centerline (Installed) 105.5

Click to expand...

Yea good sounding cam. Might be a little big for a stock stroke 360 depending on compression/stall/all the other good stuff. Mine is .519 .532 should run good for my application. This is my cruiser motor. The 426 smallblock in my vert is the nasty one.