Need help finding new temperature gauge

LOL, you have good reason to second guess me. I was using a straight wire instead of my resistor setup. The wife was dogging me and I lost my focus, I guess. :P

With the proper wire, I got the temperature gauge to read near the bottom of the normal range, and the fuel gauge read steady about 1/4 tank after a couple minutes. Testing just my resistor wire on the 200 ohm setting, I got 25-26. With it hooked up to my fuel gauge, I was having trouble getting a solid reading, but it was anywhere from 35-52, so maybe a loose connection, and that range explains the low reading on the gauge. I was just pressing the bare wire to the gauge stud with a plastic clamp.

The important thing is that both gauges are giving off a reading, so you probably saved me the expense of new gauges. :D Since the cluster seems to be functional, I'll try reseating it.

It's just past midnight here, so I won't be putting the cluster back in until tomorrow night. I also need to make a quick run to get that brake lamp bulb and socket.

Thanks so much for your help, and I'll update again tomorrow night.