71 Duster 360 (new project)

got the old stock upper shock mounts removed along with the support panel.....did some minor trimming to upper shock mount 1 3/4 inch ...bar slid in pretty good...

assembled the shocks with no springs...bolted them on to lower shock mounts...adjusted shock to ride height as shown in the instructions and then began moving upper shock mount around...up and down/back n forth until shock is 90 degree front and back...and left and right...

so everything is straight up and down....and the ride height on the shock is correct.....

will fire up the welder tomorrow...burn them in...

then take shocks off...and put springs on...bolt them back on....and then begin putting the old Duster back together...

oh wait...forgot Track Bar....that should go pretty easy...just need to cut one engine and tap the threads again....bingo