Wheel alignment help needed!!!

Caster + Camber + Toe , You need no special tools to make any of the adjustments , the control arm eccentric bolts that adjust caster and camber are usually 3/4 and the tie rod sleeve clamps are usually 1/2 inch , if the tie rods are new and never been tightened they will turn easily , use a tape measure to on the front and back side of the tire to set toe .This method is ok but hard to get a straight steering wheel . You can use a level on the tire to get the camber close but theres really no way to set caster but this method should get you close enough to get it to a shop for a wheel alignment . remember toe and camber is what wears tires , caster will make it pull to one direction or the other .