What carbs are you guys running on your 360's

My 360 had a 600 dp worked fine but was a little down on power and the vacuum pull at 5k was a little high at 1.5 to almost 2" of vacuum I switched to a 750 and the vacuum was at 1/2" or so at 6k so it needed the 750. At any rate I run a 750 DP with annular booster so jetting is not the same as a regular 750 DP. I think I would go with 70 primary 76 sec, use a 28 to 31 squirter. 6.5 or higher PV, timing at at least 15 initial. And run a PVC valve. Good luck