65 Dart 273 Engine Rebuild

I called Kanter Automotive to find out about their domed 273 pistons. They have .030" over pistons in stock and I got them to measure their compression height.

Back in post #44 I measured the height of Egge's domed pistons as well as a used set of .040 over TRW forged pistons. Here are the numbers along with the corresponding numbers from Kanter.

The Kanter pistons are taller than the Egge pistons but not as tall as the TRW pistons. All three pistons have a dome that is approximately .150 tall.

Compression Height
Egge: 1.749
Kanter: 1.771
TRW: 1.782

Height to the Top of the Dome
Egge: 1.900
Kanter: 1.921
TRW: 1.935