4 inch stroker cam size question

The compression should be in the 10.5 to 10.7 range but I could use some thicker gaskets to drop it down a little. With the aluminum heads it should be fine. It will be mainly a cruiser, I wont be doing a bunch of racing or anything. I just want it to be a nice tourqey motor that will pull a couple of old fat guys down the road at a respectable clip and spin the tires when I feel the need. I'm old enough now that comfort and ride trumps beating everybody from light to light. I have a Performer RPM air gap and an Offy Port-O-Sonic. Both of those are great intakes on the street and I am running a stick which is a little more forgiving. I have a Competition cams Hydraulic that is in the 525 lift range and I would have to look at it to see what the duration is. I will check the specs later and get back on here.