Trim polishing

Heres what me and my dad used. We used it on a high rpm drill worked great. But just make sure if your using the bench mounted buffer always polish the pieces with the wheel turning off the edge not against. Itll turn into a pretzel. Also if your using the drill kit make sure you have someone else to hold the pieces. Note: on stainless use a 500 grit sand paper and sand lightly and uniformly. Then go to 1000 grit and then to 1500 or 2000 grit then rinse dry and begin polishing. Hope this helps good luck



http://www.eastwood.com/deluxe-polishing-automotive-18-pc-kit.html