426 wedge build

Well i cant figure out how to scan the dyno sheets so i will give you the high lites. The motor made 520 Hp peak at 5600 RPM, and 552 Tq at 4200 RPM. The torque curve starts at 2900 RPM, with 515 TQ and Makes 550 tq at 4000 RPM carries that 550 Plus all the way to 4600 RPM. It carries 500 ft tq all the way to 5500 RPm its just never stops. we made the last 3 dyno pulls with the air cleaner on that i am going to run on the street. It changed the signal to the point where we lost 10 ft tq at 2900 rpm. A jet change got that back. So the motor is tuned for the way it will be driven, it wanted 32 total timing, 19 initial. The AED HOM carb is the best carb i have ever owned, 3 jet changes from out of the box and we are bang on. Factory jetting was 73 pri with PV and 87 sec blocked. we ended up at 71 Pri with PV and 83 Sec blocked.