Need Non-Mopar Help

Just did one of these on a 2002 Venture. Took about 4 hrs, and a lot of four letter words. Could do the next one in about two hrs. Don't need to remove TB, or exhaust cross over. Do need skinny fingers. Remove coolant resovior, the air filter housing, and hose to the TB. Remove the upper rad hose. Remove the front upper t-stat housing bolt, and loosen (almost to coming out) the lower rear bolt (the housing is slotted. Remove the engine "steady" brace bracket. Should be able to remove the housing and stat. When installing, it might be necessary to pry the exhaust crossover heat shield, slightly. Make sure the t-stat doesn't fall out of position. Before installing the top front bolt on the housing, put the bolts back in the engine bracket, or there is one bolt that will not go in.