Cylinder has spark but not firing..

duey_roc said
OK lol. If i hope that i did this right. I was told to take pics of the readings as well so i did. These will be in order as follows. #2, #4, #6, #8 and #1, #3, #5, #7. and for some reason, the coil read 0??? Im not sure what the hell these readings mean.
Click to expand...

IMO you have your meter on the wrong setting to get a good accurate reading. Turn the adjustment counterclockwise to the 20K setting and try again if the wires are stock type wires. For low ohm aftermarket wires set it to the 2000 setting.