Cylinder has spark but not firing..

People are not having their feelings hurt over this. In that I guarantee you are mistaken. It's that the frustration level gets to be too much. There are some very savvy people on this site, YOU have to trust what they are saying. Thing is, you are baffled, they are trying to help based on what you are telling them. If you are going to just go do your own thing after advice is given, it's no wonder people get frustrated. This is just my opinion from what I have read here, and trust me, I have read this from the beginning. See, I don't know either, I hope to pick up some tidbits of knowledge also. So, yes, some people here are just throwing their hands up over this and walking away. Thing is, and here is my advice, WRITE down everything you have done so far. And re read over this thread that you started and start checking things off. One thing is you need a plan, and DO ONE THING AT A TIME! Going helter skelter all over the place is not the way to do it. You have a problem, you need to be smarter than the problem. Now, if my comments here upset you, then so be it, I sugar coated it. See, I don't have anything at stake here, along with the members who are trying to help. You need them more than they need you. I will continue to watch this until the resolution just to see if you get it going, but no more comments from me. Good luck!!