Gas gauge not working? I think I fixed it.

barbee6043 said

i would love better pics and exact info as to what i need to do, and do you walk into auto parts store and ask for 5 and 6 volt regulators!? i admit electronics is not my strong point. if fact i'm almost 66 and not sure what i will be when i grow up!?? thanks

Click to expand...

One other suggestion, I only say this because you say that electronics is not your strong point. When you solder the wires to the pins on the regulators, use a heat sink and do not over cook the solder.

"Some components, such as transistors, can be damaged by heat when soldering so if you are not an expert it is wise to use a heat sink clipped to the lead between the joint and the component body. You can buy a special tool, but a standard crocodile clip works just as well and is cheaper.

Also I bend the pins to have more room to solder. The two outside pins I bent to a 45 degree angle away from the other pins. I also use shrink tubing for extra insulation.