my first engine rebuild (318) advises

Well engine is finaly on machine shop.

He will measure block and heads first, so i know what parts to buy (correct size).

So about valve seals and machining.
i am going to get these tools as suggested, for machining
http://www.summitracing.com/int/parts/cca-4726/overview/
http://www.summitracing.com/int/parts/cca-4734/overview/

As for the seals i will use these in intake side (are these correct?)
http://www.summitracing.com/int/parts/cca-505-1/overview/

For exhaust, can use new, stock type seals? or do i just put same seals on exhaust