'72 Scamp
Examining the cluster I saw a loose pin on the round connector. So I removed the circuit board and discovered how the pins are attached and that the loose one wasn't even secured to the board.
So I pulled out the old dremel and wire wheel attachment and got after the contact. Alter 40 years of corrosion was gone, I soldered the pin to the board.
Then decided it probably would be a good idea to solder the rest of the pins as well. Afterward, I ran a continunity test and everything checked out. :cheers:
After that, I cleaned up the contacts for the light bulbs.
Stay Tuned...
Examining the cluster I saw a loose pin on the round connector. So I removed the circuit board and discovered how the pins are attached and that the loose one wasn't even secured to the board.
So I pulled out the old dremel and wire wheel attachment and got after the contact. Alter 40 years of corrosion was gone, I soldered the pin to the board.
Then decided it probably would be a good idea to solder the rest of the pins as well. Afterward, I ran a continunity test and everything checked out. :cheers:
After that, I cleaned up the contacts for the light bulbs.
Stay Tuned...
