Fresh 727 Street Strip Trans S.B. Wont Drive

We Had problems with the First Pump As The Edge converter snout was a few thou more over a stock converter, We did all the spline counts 24, no didnt change the rear clutch pack, Not sure of the Years But My trans builder said you could not mix old and late model so he must know Thanx

Ok. I ran into a issue with that a couple yrs. back with a trans. I rebuilt for a buddy. He had the converter worked over and a new snout put on it and it was too tight. Pumps are all the same as far as the bushing goes. I had him take it back and they cut the converter snout down .0025 and it worked fine then.