Anyone running billet specialties street lites?...question.

-
cudaspaz

cudaspaz

Well-Known Member
Joined
Feb 9, 2005
Messages
13,377
Reaction score
245
Location
In a tree near you.
I'm looking at these wheels but I don't see anywhere in their information wether or not the bolt holes will support 1/2" stud.
Nowhere do they mention what stud sizes they offer at all.

If they don't do a 1/2" stud I probably won't get them.
 
Lug Nut Shank Diameter (in):0.679-0.687 in.

Nice wheels, I don't think 1/2" studs would be a problem that is a pretty standard size. Let look up lug nuts.

Yep these lug nuts will work with those wheels and 1/2 studs except you would want standard style washers.
http://www.summitracing.com/parts/crr-27723-4/overview/
 

Attachments

  • bsp-rs035606555n_w_ml.jpg
    18.6 KB · Views: 235
I just put a set on my 67. 1/2X3 inch studs. 4x15 front and 8x15 rear.
 

Attachments

  • IMG_0372.JPG
    80.4 KB · Views: 231
cuda20 said:
I just put a set on my 67. 1/2X3 inch studs. 4x15 front and 8x15 rear.
Click to expand...

Very, very nice.

I've got the weld draglites right now with the open hole long shank lugs nuts/ washers.
Wondering if they will fit or. I will need shorter ones since the welds have a pretty meaty center section.

Those wheels look really sharp on,your cuda.

I'm looking at the wheels with the black trim on the I sides and I've always liked those wheels! just wished they had black trim and so it looks like enough people requested they make them.
 
Yes you will need new lug nuts. I got them from Summit when I bought the wheels. I'll try to get some better pics up.
 
You must log in or register to reply here.
-

Back
Top