Bullit Wheels 17x8 45mm offset - how to fit?

http://www.forabodiesonly.com/mopar/showthread.php?t=237684

http://www.forabodiesonly.com/mopar/showthread.php?t=58491&highlight=bullit+wheels

I'm in better shape than some on the rear, because I have a Versailles rear axle. It's a little wider. The 5.75 backspace wheels (early) fit right on, no spacer

I picked up a set of 4 of the later wheels, and they will need about 1/2 or more on the rear, and probably more on the front. I'll need to change studs

So far as the hub, I cannot answer about the "big" rotors, but the stockers..........there's a lip on the inside bore of the wheels. You can grind that lip down with a die grinder. In other words the wheel center bore is "smaller" on the inside for a short depth......maybe 3/8" or so, and then after the lip, the bore is larger.