Comp cams has recommended this cam. I really trust the advice given here so I wanted to confirm with you guys before I buy.
Car and Engine Details:
1966 Barracuda with 727 trans. 373 suregrip 8 3/4 rear.
360 stock stroke stock bore. 1989 Roller with Hydraulic roller lifters
W2 heads mild port gasket matched to headers and intake with 2.08 intake 1.60 exhaust.
Open plenum W2 intake have not bought yet but prob a Victor Jr
Holley 750 DP.
Will not use for drag racing. target hp and torque range is 2800-6500.
I did explain to them in my email to them the same as above.
Cam recommended by Comp Cams is:
A cam that best fit your barracuda is our xtreme energy cam (20-810-9)
This cam will help make nice low-end power/torque, great throttle response, and will have a nice hot rod lumpy idle
The cam is 218/224 @ .050 and the lift is .535/.531 on a 110 LSA, This cam can be used with the stock converter or a stall that is 1800+.
Thanks
