HP estimate for mild 340

I'm curious to what this engine may put out and I'm not gonna be able to get to a dyno anytime soon so let me know ur estimate on this mild build!
1973 340 block 0.030 over, externally balanced cast crank with windage tray and stock rods with speed pro forged pistons, 360 J heads with 2.02 and 1.60 valves cleaned up and port matched to intake making approximately 9.4 to 1 compression. Comp cams xe268h, Intake Duration at 050 inch Lift:*224, Exhaust Duration at 050 inch Lift:*230, Valve Lift with Factory Rocker Arm Ratio:*0.477 int./0.480 exh., Lobe Separation (degrees):*110, with hardland sharp roller rockers, 1.6 ratio taking the valve lift too 0.509 int./ 0.512 exh. Topped off with a edelbrock air gap rpm intake, a 670 cfm holley street avenger carb, a mopar performance distributor and a msd 6al ignition box.