let us know if the 2 row infact gives you the room needed to run a mechanical fan...also does the 2 row have the same lip on the back(engine) side that the electric fans tuck into?
Went with the cc374 26" 3 row core. measures out a tad thinner than the stock /6 radiator (1/4"). On another project at the moment. Won't be installing until motor is back from machinist, tranny done, etc. The 3 row has the lip. The American Eagle 2 row, ?, sorry can't help.
I would consider measuring to see if you could get the 26" to fit if you plan on running the mechanical fan. Look at the location of the top hose on the 22" core radiator. Guys have had problems clearing the hose with the fan. Search this forum to find pics of the actual radiator and you will see that the top hose is not much off set of the center of the radiator (in relation to the cap). I'm almost sure that would have interfered with the fan on my car. Some guys simply have drilled new holes to mount the radiator higher, clearing the fan. Pretty tight fit for height when I measured mine out.
