How to install this Hemi hood scoop

put the scoop where you want it on the hood and mark it completely around the perimeter. on the back you will have to cut the lip out of the middle starting from the center and cut a little at a time until it fits flush on the hood. go get some two part epoxy and glue it on. let it set up for a day. now drill and use 1/4" x 20tpi bolts every two inches. I prefer carriage bolts because they have flat rounded heads and don't show up real bad. you will have to file the bolt hole square to get them to fit as they have a square shank just under the head. to hold the front down you will need two or three (your preference) 3/8" carriage bolts and enough 3/8" aluminum fuel line to cover them. the nuts for all the bolts should be nylocs so they don't come loose.