Cuda Stereo system

Finally...I don't have a question. But I have talked about my 500 watt stereo system and since I had to remove my back seat I thought I would take some pics and share them. I know you guys and gals are always looking for ways to modify/improve your ride. I love my music and I like it loud so I built this metal frame to mount behind the rear seat. I designed it to bolt to the same two bolts (per side) that hold the back of the seat upright. I also have two kids and they ride with me often so I really worried about being in an accident with only lap belts. To solve the two problems (stereo speaker mounts and seat belt mounts) I built this 1/8" X 1 1/2" metal frame to also attach the shoulder harness seat belts to. I mounted two 10" subs and my amps to this 1/2" plywood board which is attached to the metal frame. The metal frame also gave me a place to mount a head rest to help protect the back seat riders from whip lash....at least that's what I tell my kids LOL!!! I really wanted a place to but the BARRACUDA LOGO!!!!LOLOLOLOL!!!

In the first pic you can see the speakers from the trunk point of view. Also in the pics you can see the small arm rests (speaker boxes) I made for the smaller 50 watt rear speakers (yellow arm rests under rear window cranks). There's not a whole lot of room in a fastback Barracuda and this was the only place I could find for two 10" subs and the big amps!!! The last pic shows the metal bracket looking through the back glass. I tried to make it stealth (so it wasn't so noticeable). Nobody even knows it's there until I crank up the volume and watch their jaws drop!!!

Treblig