Rotisserie - never seen one like this before

ok, heres my poor mans rotisserie. AKA rocking rotisserie. I had all the steel lying around the house. the curved pieces and silver pieces are from an old trampoline i bought my kids that took flight in a springtime storm. i saved the pieces with the intent of doing this. so far $0 dollars spent. i will probably have to spend about $35 more on the remaining material i need.


been using a fan to keep the fumes away as i'm welding since the galvanizing is poisonous to breathe.


i will have to buy some square tubing to finish, and make a copy of the one i just made to use for the back of the car. the one i made for the front is pretty stout. there is a jackstand in the pic, but it is not supporting the car. i used it to support the car when making this.


these pieces are removable from the piece attached to the frame horns. that piece i have legs with wheels that slide in to roll the car around. i will be making the same setup for the back.

a gutted shell is still heavy, but in the grand scheme of things pretty light with nothing in it. i will be using this setup to scrape, clean, primer, and paint the undercarriage.

Matt