greymouser7
Vagrant Vagabond “Veni Vidi Vici”
- Joined
- Apr 17, 2010
- Messages
- 3,729
- Reaction score
- 1,493
Contact seller
<<<good deal<<<looks gorgeous, plus tons of other parts good luck>>>
http://daytona.craigslist.org/pts/4357702905.html
Brand new AMD front bumper with brackets for a 1972 Plymouth Duster
(it will fit on any 1970-72 but is "Correct" for a 71-72 because of the bumper jack slots) Asking $250 O.B.O. I have over $450 invested in it with shipping included.
Front bumper filler panel and hood support for a 1970 - 72 Plymouth Duster (yellow parts in picture next to the AMD front bumper)
Plymouth Duster / Dodge Dart Sport / Demon AC parts. Lines and AC / heater box, dash controls etc.
Big and Small block Mopar 727 transmissions for cores / rebuilding (have one 904 small block available too.)
*****New Mopar Dodge / Plymouth E / B Body Sheet metal******
Passenger side inner front fender well with hood hinge mounting captive nuts for 1970 -74 Challenger R/T / 'Cuda
(also fits 1971-2 B Body Dodge and Plymouth cars like the Charger, Coronet, Super Bee, Road Runner, GTX, Satellite Sebring, Sebring Plus) *****New**** purchased from Year One Asking $125 O.B.O
Gas Tank / Trunk Floor Mounting Braces (PAIR) for 1970 - 74 Dodge Challenger R/T / 'Cuda ****NEW**** purchased from Year One Asking $100 O.B.O
14 Inch Mopar Rally Wheels Complete set of 4 with trim rings and center caps Tires mounted hold air and are good for a rolling or project car. 2 wheels have been removed from the 72 Satellite Sebring. The other 2 are still mounted on the front of the car and I will take them off when the sale is made.
Front / Rear Valances available for 1970 -74 Dodge Challenger asking $50 -$75 each depending on condition. NO RUST some dents.
Complete B Body 8-1/4 rear end from a 72 Satellite Sebring. It is an open unit with 2.71 gears in it. Asking $100, O.B.O
Rear Seat from a 77 / 78 Road Runner or Super Coupe in white Front matching buckets possibly for sale too. All seats are very nice.
440 Motor Home / Truck exhaust manifolds set
440 cast iron 4 Thermo Quad barrel spread bore intake $50 O.B.O. from a 1974 440 engine
Several Thermo Quad carbs available too............
440 factory cast iron cylinder heads casting number 3769902 from a 1974 440 engine
I also have several sets of bare "906" 383-440 HP heads. One set has been cleaned the other has not.
A/C and Heater Box for 68-70 B Body Mopar
Brand new Legendary Interior rear door panels in black for a 73 Dart Hard Top or Swinger in black Asking $100 O.B.O.
A complete 8- 3/4 rear end with a good 3.91 sure grip set up 489 case with large yoke to fit a 70-74 Cuda or Challenger E - Body, No brakes included **********SALE PENDING**********
Rust free NICE flat Non Rally Hood for 1970 -74 Challenger ( people use these flat hoods to make Shaker Hoods from ) $200
RUST FREE sheet metal for a 73-74 Plymouth Duster ........... passenger side front FENDER and TRUNK LID **********SOLD THE HOOD********
Door Hinges for 1967 - 74 Mopar Dodge Plymouth A Body Dart, Duster, Demon, Dart Sport, Duster, A Body 'Cuda / Barracuda 1967 - 69
Several sets of Doors for 70-74 A body fast back Duster, Demon, Dart Sport
most are complete with side glass and window tracks. Some dented slightly, others have a little rust, but very decent overall *****Price Varies depending on condition*****
Rally mirrors for E and B body cars
Front Grill assemblies for 73 -74 Duster, Dart Sport, Valiant **** SEVERAL SOLD **** HAVE A FEW LEFT ****
Several sets of bumper fillers for 73-74 Duster / Dart Sport (mounts in between front bumper and lower portion of the grill) **** SEVERAL SOLD ****ONLY ONE LEFT ******
Hood latch supports for A body 73-74 *** SOLD ONE **** ONE LEFT
NICE Hood Hinges 67-74 A Body Mopar ***** SEVERAL NICE SETS LEFT *****
Several sets of anodized aluminum head light trim bezels and front turn signal lenses for 73-74 Duster **** SEVERAL SETS SOLD **** HAVE A FEW SETS LEFT****
"Direct Connection" anodized blue Big Block 383-440 valve cover set, (used but nice). Asking $100 O.B.O.
Clevite 77 CB-481 P-20 Rod bearing (set of 8) .020 undersize for 318-340-360 Small block Mopar "A" engines Asking $45 O.B.O.
Sealed Power .030 over Piston Ring set for a 340 small block
NOS Mopar 4173443 small block harmonic balancer / vibration damper still in the factory box Asking $100 O.B.O.
A Body Fast back Pop out rear windows (several VERY nice sets) in clear or tinted glass
NEW A&M Soft Seal Gaskets for A body Hard Top roll down side windows
Manual NON- adjustable driver side mirror, nice shape for 71-72 B Body or 71-74 E Body
1973 Chevy pick up truck C10-C20 - C30 metal grill with "350" engine call out emblem and radiator fan shroud
Any reasonable offer for this stuff will be accepted.
I have too much to list here. Call or text my cell for any questions or needs. I can take photos of parts and send them to you.
Please call or text three eight 6 - five 0 six - one 9 four 0
Leave a message if I can't answer.
Thanks !!!!!
http://daytona.craigslist.org/pts/4357702905.html
Brand new AMD front bumper with brackets for a 1972 Plymouth Duster
(it will fit on any 1970-72 but is "Correct" for a 71-72 because of the bumper jack slots) Asking $250 O.B.O. I have over $450 invested in it with shipping included.
Front bumper filler panel and hood support for a 1970 - 72 Plymouth Duster (yellow parts in picture next to the AMD front bumper)
Plymouth Duster / Dodge Dart Sport / Demon AC parts. Lines and AC / heater box, dash controls etc.
Big and Small block Mopar 727 transmissions for cores / rebuilding (have one 904 small block available too.)
*****New Mopar Dodge / Plymouth E / B Body Sheet metal******
Passenger side inner front fender well with hood hinge mounting captive nuts for 1970 -74 Challenger R/T / 'Cuda
(also fits 1971-2 B Body Dodge and Plymouth cars like the Charger, Coronet, Super Bee, Road Runner, GTX, Satellite Sebring, Sebring Plus) *****New**** purchased from Year One Asking $125 O.B.O
Gas Tank / Trunk Floor Mounting Braces (PAIR) for 1970 - 74 Dodge Challenger R/T / 'Cuda ****NEW**** purchased from Year One Asking $100 O.B.O
14 Inch Mopar Rally Wheels Complete set of 4 with trim rings and center caps Tires mounted hold air and are good for a rolling or project car. 2 wheels have been removed from the 72 Satellite Sebring. The other 2 are still mounted on the front of the car and I will take them off when the sale is made.
Front / Rear Valances available for 1970 -74 Dodge Challenger asking $50 -$75 each depending on condition. NO RUST some dents.
Complete B Body 8-1/4 rear end from a 72 Satellite Sebring. It is an open unit with 2.71 gears in it. Asking $100, O.B.O
Rear Seat from a 77 / 78 Road Runner or Super Coupe in white Front matching buckets possibly for sale too. All seats are very nice.
440 Motor Home / Truck exhaust manifolds set
440 cast iron 4 Thermo Quad barrel spread bore intake $50 O.B.O. from a 1974 440 engine
Several Thermo Quad carbs available too............
440 factory cast iron cylinder heads casting number 3769902 from a 1974 440 engine
I also have several sets of bare "906" 383-440 HP heads. One set has been cleaned the other has not.
A/C and Heater Box for 68-70 B Body Mopar
Brand new Legendary Interior rear door panels in black for a 73 Dart Hard Top or Swinger in black Asking $100 O.B.O.
A complete 8- 3/4 rear end with a good 3.91 sure grip set up 489 case with large yoke to fit a 70-74 Cuda or Challenger E - Body, No brakes included **********SALE PENDING**********
Rust free NICE flat Non Rally Hood for 1970 -74 Challenger ( people use these flat hoods to make Shaker Hoods from ) $200
RUST FREE sheet metal for a 73-74 Plymouth Duster ........... passenger side front FENDER and TRUNK LID **********SOLD THE HOOD********
Door Hinges for 1967 - 74 Mopar Dodge Plymouth A Body Dart, Duster, Demon, Dart Sport, Duster, A Body 'Cuda / Barracuda 1967 - 69
Several sets of Doors for 70-74 A body fast back Duster, Demon, Dart Sport
most are complete with side glass and window tracks. Some dented slightly, others have a little rust, but very decent overall *****Price Varies depending on condition*****
Rally mirrors for E and B body cars
Front Grill assemblies for 73 -74 Duster, Dart Sport, Valiant **** SEVERAL SOLD **** HAVE A FEW LEFT ****
Several sets of bumper fillers for 73-74 Duster / Dart Sport (mounts in between front bumper and lower portion of the grill) **** SEVERAL SOLD ****ONLY ONE LEFT ******
Hood latch supports for A body 73-74 *** SOLD ONE **** ONE LEFT
NICE Hood Hinges 67-74 A Body Mopar ***** SEVERAL NICE SETS LEFT *****
Several sets of anodized aluminum head light trim bezels and front turn signal lenses for 73-74 Duster **** SEVERAL SETS SOLD **** HAVE A FEW SETS LEFT****
"Direct Connection" anodized blue Big Block 383-440 valve cover set, (used but nice). Asking $100 O.B.O.
Clevite 77 CB-481 P-20 Rod bearing (set of 8) .020 undersize for 318-340-360 Small block Mopar "A" engines Asking $45 O.B.O.
Sealed Power .030 over Piston Ring set for a 340 small block
NOS Mopar 4173443 small block harmonic balancer / vibration damper still in the factory box Asking $100 O.B.O.
A Body Fast back Pop out rear windows (several VERY nice sets) in clear or tinted glass
NEW A&M Soft Seal Gaskets for A body Hard Top roll down side windows
Manual NON- adjustable driver side mirror, nice shape for 71-72 B Body or 71-74 E Body
1973 Chevy pick up truck C10-C20 - C30 metal grill with "350" engine call out emblem and radiator fan shroud
Any reasonable offer for this stuff will be accepted.
I have too much to list here. Call or text my cell for any questions or needs. I can take photos of parts and send them to you.
Please call or text three eight 6 - five 0 six - one 9 four 0
Leave a message if I can't answer.
Thanks !!!!!