intake & carb for built 318

Another amateur build thread, i know lol. After 6 long years of neglecting my 67 fastback I finally have the shop space and time for her. hoping to have it on the road by april. I didn't have the time and money to get it set up properly back then so I just tried to get it together in a hurry before . haste makes waste, forgot the cam was much bigger than the rv my 318 had before and didn't do springs sooo...bent a couple pushrods.
So I pulled the motor out last night, going to go completely though it and put it together better this time. the build is fresh 70 318, with 340 heads, forged pistons cant remember details about them, think he said 10.5:1. The motor was built by keith Hershberger in woodburn Oregon, ran 1000 miles then swapped out for a bigger motor. I bought the block and rolling assembly, but the heads had already been sold, I took the 340 heads from my last motor and had them freshened up then put them on this block. the cam the block came with is a mopar purple 284 484. im not concerned about making this the best possible performing build, just looking for the best intake and carb combo for what I have so I can enjoy the car this summer. i'll be pulling it in a year or two anyways because I have a 360 interceptor long block to focus on while running the 318. I have a edelbrock performer, but im thinking an airgap would be better suited? ebay has some budget ones, ill see about getting some pictures up, help much appreciated!