Cam is 500, lifters the same and valves and springs add up to over a grand. Ill get it done this summer I hope but only my economics needs to return or its over for anything at this point but roller skates. Lol
I meant go the cheapest route possible to get it running under boost; not a full on x275 motor.
6.1 crank (free to $150)
K1 or Molnar rods ($525-$575)
Shelf pistons ($700) or custom ($1100) with pins and rings
$300 cam
Factory lifters, Good beehive springs, factory valves, factory rockers and retainers
Build it for 7,000 rpm shifts and 15 psi. That would be a good cheap test motor that easily runs 9's
