First engine build.

I checked ring gap on the #1 bore. I have these speed pro 116 pistons and rings http://www.summitracing.com/parts/slp-8kh116cp30/overview/make/dodge

The top ring I assume is in the #1 pocket of the package and is shiny and has no bevel. That gap was .018"

The second ring was iron in #2 pocket with a bevel and gap was .014".

The oil rings were .025"

I have found alot of conflicting information on speed pro end gap. Is .004" for every inch for top and .0055 for second right? If this is right the top would be .016 and second be .022? My pistons are 30 over. I can not find any info on the package or the website for speed pro. If someone could verify some info it would be appreciated. Thanks.