Rapom's Rocket - just another Duster build thread
I continued on with the passenger floor pan replacement but failed to take any pictures as one morning I was out in the shop and just knocked it out. Turned out very nice. There are tons of threads on floor replacements so I wont go into it. Here are a few pictures of the work I did on the drivers side floor. It was solid but had some good surface rust going. Pic 1: A wire wheel on a drill took most of the paint and rust off. The floor had a weird discoloration in it that I thought was corrosion but that came right off with the wheel. It was
in the metal not
on it. Pic 2: Taped up and a heavy coat of rust converter doing it's thing. Pic 3: A good coat of POR 15 laid down. After the passenger foot well was replaced the rest of the floor was gone over with the wire wheel and a good coat of flat black primer and paint made it all look uniform.
View attachment IMG_2137.jpg
View attachment IMG_2139.jpg
View attachment IMG_2141.jpg
