Accurate Exhaust
I scrapped my compression bent 2 1/4" Accurate system for the mandrell bent 2 1/2" system by TTi. If you're concerned with following the OE pipe route, then stay away from the TTi system. Their driver side head pipe goes straight back from the manifold and totally avoids snaking around the torsion bar/starter/steering box.
I don't have a pic of the head pipes, but this shot of the tailpipes will give you an idea of the difference. Plus I picked up almost three tenths at the track with the TTi pipes over the Accurate pipes.
I scrapped my compression bent 2 1/4" Accurate system for the mandrell bent 2 1/2" system by TTi. If you're concerned with following the OE pipe route, then stay away from the TTi system. Their driver side head pipe goes straight back from the manifold and totally avoids snaking around the torsion bar/starter/steering box.
I don't have a pic of the head pipes, but this shot of the tailpipes will give you an idea of the difference. Plus I picked up almost three tenths at the track with the TTi pipes over the Accurate pipes.
