Gas Tank/sump - will it pass tech?

Tanks: When permitted by class regulations, fuel tanks located
outside body and/or frame must be enclosed in a steel tube frame
constructed of minimum 1 1/4-inch O.D. x .058 chromoly or .118 mild
steel tubing. All fuel tanks must be isolated from the driver’s
compartment by a firewall, completely sealed to prevent any fuel from
entering the driver’s compartment. All fuel tanks must have a pressure
cap and be vented outside of body. A positive-locking screw-on fuel
tank cap is mandatory on all open-bodied cars. Insulated fuel tanks
prohibited. When used, nonmetallic fuel cells must have a metal box
protecting the part of the fuel cell that is outside of body lines or trunk
floor, excluding hose connection area in rear. The metal box must be
constructed of minimum .024 steel or .032 aluminum. Nonmetallic fuel
cells or tanks must be grounded to frame.

probably needs a steel or aluminum box of some kind to protect it....

but then again...the tech guys in vegas hardly look for anything..lol