500+ci Builder

Ryan Johnson at Shady Dell Speed Shop. Very Knowledgeable does all the porting in house and Knows his stuff. He has built two of the engines in my familys hot rod my 526 Wedge and My dads blown 540 wedge

The 526 Wedge Heres the specs


70 cast Iron Block (RB)
K1 technologies Crank and Rods (Decent price and very very nicely machined guy who owns K1 use to own Olivers Rods)
keith Black Pistons (10.1 to one Compression)
Multi layer head Gasket (Manufcatuer Unknown will look later and report back)
Indy 235cc EZ heads (Bought from Muscle motors, big mistake on that part don't buy anything from Muscle Motors)(Ryan Hand ported the Intake Runners and the Exhaust ports)
Indy Single Plane Intake(Also Ported By Mr. Johnson)
Crane Rockers arms (Decent Price for the Application)
Bullet Cam (Not totally aware of Specs will report Back Later)
SV-1 Carb 1 Barrel (really pricey total but worth 25 Ft LB of tourque over a 1150 4 Barrel)
Mopar Perfomance aluminum Water Pump Housing (Price was right)
Electric Water Pump (30HP for 300 Dollars)
Msd Ignition/ Dirtibutor (Looks good and Runs excellent)


738 Hp 711 Tourque

711 Torque at 5200 Rpm

738 Hp at 5900 RPM

93 Otcane

Ill report Back Later with the other specs
Appreciate your recipe. Makes me more confident that what I'm asking for is easily do able. A little surprise that the stock block is holding up as I understand your right about the HP limit. No problems I assume?

None so far and I haven't been all highway cruising it either the cam I forgot to mention is a solid roller and this thing will throw u into the seat and hold u there but yet be perfectly fine in driving around town call Ryan Johnson he can specify wat be best for your application and he may be able to give u the exact cam numbers you'll need

Posted via Topify using iPhone/iPad