416 - Solid Roller Camshaft Recommendation

Hey guys, I was hoping for a cam recommendation by guys with real world experience for my 416. The motor is partially screwed together at the moment and I have a Hughes Engines solid flat tappet stick for it HTL5256AS - 110LSA (252/256 @ 0.050 0.572/0.579 lifts 110LSA) but was looking for a solid roller that would be 'streetable' and provide power with reliability:

* 71 340 block up 0.030'
* 4inch MP crank
* Eagle rods 6.123'
* Ross forged pistons (dished -21cc)
* Edelbrock RPM heads ported to stage 2 by SDSS (274cfm/214cfm peak)
* 55cc chambers, 0.027' Cometic head gasket, 0.039' quench distance
* 11.2:1 compression
* Edelbrock Super Victor intake
* Pro Systems 950HP carby - flows 840cfm
* 1 3/4, 4 into 1 pipes, 3 inch collector
* 727 Torqueflite with Cheetah reverse pattern shift
* 4,5000 converter
* 9 inch, locker, 31 spline axles, 4.56 final drive

I'm looking to run a 10 second pass on pump gas in my 3,500lbs Australian Charger (A Body). What do you guys think of the Hughes solid cam I have? What solid roller would you recommend that will be reliable and make good power? Please, I would prefer to hear from people with race and street car experience running similar cams with similar combos.
Thanks

Chris
*