Torker 2 vs Performer RPM?

MTmopars said

A 3000 stall doesn't mean the motor has to rev to 3000 before the car moves. My truck has one and it drives normally under light to moderate throttle input. Start mashing the throttle and it flashes to 3000 and hold there until everything catches up and the rpm start rising again. Truck has a 402 MP stroker, punched 20 and crosswind Air Gap. Hydraulic roller 288/292 duration

0628131501 - YouTube

Click to expand...

you guys ever pull the carb off and look at the runner heigth on a torker 2 ? self explanitory on what needs to be done w/ it, I changed the flow at least 20 cfm by reworking mine, of course opening the flange up to fit my fast 2 throttle body was a good part of it, picked it up on ebay for $140, after a guy had it polished.(pretty) still about 30=35 cfm below my heads flow tho.
I wouldn`t change from one to the other on a r/b stroker, low end power ain`t a problem on em. will eventually go to the victor after I rework it for the bigger trottle body.