Hey Darren,
The front suspension is as follows: The K member is welded solid all the way around, no just spot welded. OEM 73 up spindles, caliper brackets, and calipers. The rotors are drilled 73 up (got them off ebay several years ago, not sure who made them). The disc brake shields are repo off ebay and had to open the holes up a little for the caliper bracket bolts to fit in. The upper control arms are Dillenger. The strut rods are Hotchkis. The lower control arms are OEM 69 with the stiffening plates welded in and new lca bushings installed. The drag link, inner and outer tie rod ends, adjustment sleeves, idler arm, and pittman arm are all OEM. The steering gear is Flaming River. The torsion bars are NOS 892,893, powder coated. The shocks are gabriels and had to paint them to match the rears. The front sway bar is 1 1/8" Addco, gold anodized but I'm pretty sure that I will have it powder coated silver. Thats pretty much it, if I could only snap my fingers and all would be on my world would be in sync.
Martin