360 crank in a 318 block

On another note...why not use the 318 block and go
With a 4.00 stroke crank? It's got the same size journals He (you) could use the stock rods and get
Lower pistons or get 6.123 h- beam rods and flat top pistons with a dish. Heads could be
360 or 340 j heads with the 1.88 intake valves. Bored. 030 over would be
390 cubes. I had one with stock 318rods and custom DIamond forged pistons and the dyno said 431 hp and 454 ftlbs torque with no accessories. It had a cast iron factory 4bbl intake with a thermoquad.
HAD is the opperative word.