Front end upgrades 74 dart 225 slant 6

There is no way I'd screw around with anything less than ALL rubber bushings, and if you do any mechanical work at all you can do this all yourself. Get yourself a shop manual to start if you do not have.........(The 72 and 73 are the latest, here)

http://www.forabodiesonly.com/mopar/showthread.php?p=1970088617

and ask questions right in this thread. You can make most of the "pullers" you need from pipe fittings, bolts, washers and all thread, or buy them. If you have good local shops with a press they can do this. A torch helps, as does an air chisel. Not always necessary. Being young, a big vise and hammer helps, LOL

As above. Don't use the old factory alignment specs with radial tires, read this:

http://www.allpar.com/history/mopar/front-end-alignment.html

This chart came from there



It's just not that hard to do your own alignment, I'm an old guy. 65, with osteo problems, I don't even have a shop. I use my car trailer for a rack!!

http://www.forabodiesonly.com/mopar/showthread.php?t=248235

http://www.forabodiesonly.com/mopar/showthread.php?p=1969910897