Component RPM limits

Agree with UHCoog - Common opinion is dont take it above 7k without exta oil capacity.

I have my limiter set at 6800... I change around 6700 - Modman, MSD 6013, cam id 218/227 556/566 110 lsa.

FWIW its actually still pulling at 7000! ..but to use the rpm range I need decent springs and the higher oil capacity.

I asked Andy at PWR why it revved so high - he seemed to think the Modman was the main cause....not so much the fact that the SRT MAX cams install 4 deg retarded from straight up to provide Piston to Valve clearance.

General opinion on the PAC is they arent as reliable as the PSI......but the PAC 1535 seems like a good option...nitrided and with the correct Inner Diameter so 6.1 cages can be used.