Needing advice on 360

Wow I have been really busy at work and just now got to check this. Thanks for the suggestions. Just to clarify I did use new factory replacement head bolts when I put this engine together. The machine shop milled 4 thousanths off the passenger side head to be sure it's flat.

I hope to have some time this Sunday to do some thorough inspection on the cylinders on the passenger side to make sure there are no cracks in the cylinders. If the block is ok I then plan to do a compression check on the driver's side before I take the driver's side head off. If that head gasket looks fine and those cylinders look fine I will take that head in to the machine shop to have it pressure checked and milled as well.

I will keep you guys posted on my progress. If everything checks out ok I might switch to fel pro head gaskets. I do plan on using new head bolts when everything goes back together.