340 .040 over pistons for Zero Deck...Where to find?

Hey gent's....

Getting into the 340 build for my wife's '71 Dart. I'm building this motor for Quench. Along the way I decided to go with an Eddy Performer RPM Alum. head, 63CC closed chamber. The motor is getting punched .040 to eliminate some rust issues at the bottom of a couple cylinders.

Anyways, I'm trying to build for zero deck for my quench, with a stock stroke. One thing that is giving me grief is all the pistons I find are for the earlier high comp 340's with a compression height of 1.84, which puts the pistons above deck. I know there was the later 340 with a comp height of 1.74 (below deck pistons), but I can't seem to find pistons anywhere for that. The block will need the deck shaved a tad, so that put's a 1.84 piston even higher up.

Searching through the threads here I see folks have shaved the pistons to achieve a zero deck and then run a .039 gasket for their quench. With the deck coming down, i'm just hoping I can find a piston with a comp height more in the 1.70-1.74 range. I think if I found those piston's it would be easier to dial into zero deck than shaving the crap out of 1.84's. Any idea's or sources out there?

Thanks,

-Will


BTW, Pep boys has a sale going to the 24th, 25% off any order of $100 bucks or more, + free shipping. A set of assembled Eddy Performer RPM heads shipped to my door was $1050!