Help me build my 340

I used this exact build, a TF904 with Hughes 3000 stall, Transgo TF2, and a set of super stock springs; 8-3/4 with 3.91 Richmond gears with an Auburn sure grip and TTI headers with a cross pipe with 2-1/2" exhaust.

Dynoed(bench) 410hp and 411lb lbs of torque.

In my 69 Dart I ran 11:98@112 with drag radials @ 18lbs with 68 degrees of ambient temperature.

The machining is the most important part along with cleanliness.

http://www.compcams.com/information/...MM0201-001.asp

Very good article for the beginner and has the motor has served me well. And I drive it one the street every weekend.