EQ's,Cam, and Rocker recommends.

I'm looking into some EQ 318B heads for an upcoming junkyard 360 magnum swap,in my 72 Duster hopefully at the end of summer,beginning fall.I was wondering who people went thru to get the 318B fully assembled with 2.02? I've read bad reviews on Clearwater,AND Odessa,and some on Hughes.

It will be street driven most the time, and a track trip about once a month, twice if I can get the time to.

I'm looking at:----

Comp Cams XR274HR-10: 224/230@50 538/534" (recommendations otherwise?)
Rockers stock for cost (recommendations)
HOLLEY 750 dp Vac Sec (owned)
Edelbrock Airgap Rpm (owned)
Kevko Pan M302 (recommendation otherwise?)
TTI 1 5/8 -1 3/4" stepped headers (owned)
TTI 3" x-pipe (way big, but I own em)

904 -No idea what Converter to get (2500-2800?? Recommendations/PTC,Coan)
-CRT Street HP rebuild,TF-2,Thicker band strut, Rear billet servo,4.2 KD,MP Deep Pan
8 3/4" - 3.91:1 Suregrip (in car)
275/60-15 Nitto Drag Extreme 555 (28" Diameter)
SS 002/003 Springs (on car)
-MP P4529514 Drag Shocks
.850 Torsion bars (stock 318 non A/C,in car)
-Competition Engineering 3-way CEE 2620.
Edelbrock 1720 Fuel Pump (6-7psi,Recommendations..trying to keep mechanical)
3/8" fuel line through out,including pick-up /sender

non A/C car, with PS so assume approx 3200 lbs. wet.

I have heard nothing but bad feedback from the "machine shops" in my local area...the only one that everyone agreed on being a good shop,closed up last fall due to the owner passing on! :sad10: